EM132 Analog Output （132-0HB10）-Industrial 4.0 control and networking solutions provider —

Analog module

Analog module

Analog Output module,Isolation,±10V Voltage or 0-20mA Current.Integrating the CPU processor,filter technique

Order No.：CTS7 132-0HB10

Specification：2 channels of Voltage or Current, 12BIT precision

Product Description

Order data

Specification	Order No.
CTSC-100 EM132 Analog Output Module, 2 channels of Voltage or Current, 12BIT precision	CTS7 132-0HB10

Technical Spec

Performance Parameters

Specification	EM132, 2AQ×12BIT
Physical Features
Dimensions(W×H×D)	46×80×62mm
Power Loss(dissipation)	2W
Power Consumption
From +5V(from I/O bus)	24mA
From L+	61mA
L+ voltage range,class 2 or DC sensor supply	20.4～28.8V DC
LED indicator	24 VDC Power Supply Good ON = no fault, OFF = no 24 VDC power
Analog Output Features
Number of analog output points	2
Isolation (field side to logic circuit)	Optical isolated: 500VAC, 1 minute
Signal range
Voltage output Current output	±10V 0～20mA
Resolution, full-scale
Voltage output Current output	12BIT 11BIT
Data word format
Voltage output Current output	-32000~+32000 0~32000
Accuracy	typical: ±0.5% of full scale; Worse: ±2% of full scale
Setting time
Voltage output Current output	100μs 2ms
Maximum drive@24VDC power
Voltage output Current output	5000 ohm, minimum 500 ohm, maximum

Note

The 12 bits readings of the digital-to-analog converter (DAC) are left-justified in the output data word format.

The MSB is the sign bit: zero indicates a positive data word value. The four trailing zeros are truncated before

being loaded into the DAC registers. These bits have no effect on the output signal value.

Installation

Size Diagram:

Wiring Diagram:

Return