- Product Description
-
Simple series Weighing module,
2 sensor signal input,
0.01% module accuracy,
5VDC, 24-bit accuracy
150mA excitation power output
CTSI-AWT02-S3:
Simple series weighing module, 2 sensor signal input, 0.01% module accuracy, 5VDC, 150mA excitation power output per
channel, 24-bit accuracy；Supports external libraries, Not support weightless calibration function.
CTSI-AWT02-I3:
Simple series weighing module, 2 sensor signal input, 0.01% module accuracy, 5VDC, 150mA excitation power output per
channel, 24-bit accuracy；Support internal library and weightless calibration function.
- Technical Spec
-
Order Number CTSI-AWT01-I3 CTSI-AWT02-I3 CTSI-AWT01-S3 CTSI-AWT02-S3 Product Features Code-free Calibration Supported.
Calibration process:
1. Input sensor sensitivity
2. Input sensor maximum range
Trigger and execute code-free calibration commandNot supported Auto-zero on Power-up Configurable to enable or disable.
Range: ±1~99% of full scaleConfigurable to enable or disable.
Range: ±1~99% of full scaleFiltering Mode Configurable to enable or disable.
Supports Advanced Mode and Normal Mode.
Advanced Mode: Data can be read in every CPU task cycle.
Normal Mode: New data can be read only after each filter cycle on the CPU.Configurable to enable or disable.
Supports Advanced Mode and Normal Mode.
Advanced Mode: Data can be read in every CPU task cycle.
Normal Mode: New data can be read only after each filter cycle on the CPU.Zero-tracking Function Supported, 0~500 Supported, 0~500 Library Internal library External library
mod_cth2_231_7wa33_v2.0.ctmwlPhysical Characteristics Dimensions （W×H×D） 24 x 104 x 80 mm IP Rating IP20 Module Hot-swappable Function Not supported Power Supply Specifications Rated Input Voltage 24V DC(20.4V~28.8V DC) Input Power Protection Supports reverse polarity protection LED Indicator Characteristics Note 1: Blinking: Flashes once every 200 milliseconds. PR Indicator Green ON = 24VDC power supply and bus power supply normal Blinking = 24VDC power supply abnormal, bus power supply normal OFF = Bus power supply abnormal SF Indicator Red ON = Mismatch in module configuration (e.g., incorrect address assignment, inconsistent configuration, module not detected) Blinking = Input signal fault (e.g., disconnection) OFF = No fault Channel Indicator Green ON = Channel enabled OFF = Channel disabled Weighing Sensor Connection Specifications Number of Channels 1 2 1 2 Connection Method Strain gauge, fully bridged using 4-wire or 6-wire technology Error Limit ≤0.01% Basic Error ≤0.05％FS Nonlinearity Error ≤0.01%FS Update Rate Selectable: 50Hz, 60Hz, 100Hz, 400Hz, 1200Hz, 2400Hz Internal Resolution 16777216（24bit） Weight Data Format 4 bytes Weighing Sensitivity 0~1mV/V 0~2mV/V 0~4mV/V 0~8mV/V 0~16mV/V 0~32mV/V Maximum distance to weighing sensor 50m Weighing Sensor Power Supply Voltage Typical DC 5V Maximum Current 150mA Sensor Input Signal Range -0.5mv~+5.5mv（0~1mV/V） -1.0mv~+11.0mv（0~2mV/V） -2.0mv~+22.0mv（0~4mV/V） -4.0mv~+44.0mv（0~8mV/V） -8.0mv~+88.0mv（0~16mV/V） -16mv~+176.0mv（0~32mV/V） Permissible Weighing Sensor Resistance Without explosion-proof interface ＞40Ω ＜1040Ω With explosion-proof interface ＞87Ω ＜1040Ω Common-mode Rejection Typical 80dB Low-pass Filter Cut-off Frequency 1Hz、2Hz、5Hz、10Hz 、15Hz、25Hz 、30Hz、50Hz、60Hz、100Hz、500Hz、1000Hz、2000Hz、3000Hz Measuring Filter of Average-value Filter 0~2000 Insulation 500V DC
- Installation
