- Product Description
-
Simple seriesDigital output module
8-point relay output
2A
- Technical Spec
-
Order Number CTSI-DIT16-S1 CTSI-DQN16-S1 CTSI-DQP16-S1 CTSI-DPN16-S1 CTSI-DMN16-S1 CTSI-DQR08-S1 Physical Characteristics Dimensions（W×H×D） 12 x 104 x 80 mm 24 x 104 x 80 mm IP Rating IP20 Module Hot-swappable Function Not supported Power Supply Specifications Rated Input Voltage — 24V DC(20.4V~28.8V DC) Input Power Protection — Supports reverse polarity protection LED Indicator Characteristics PR Indicator Green ON = 24VDC power supply and bus power supply normal OFF = Bus power supply abnormal SF Indicator Red ON = Mismatch in module configuration (e.g., incorrect address assignment, inconsistent configuration, module not detected) OFF = No fault I/O Indicator Green ON = Signal input OFF = No signal input Digital Output Expansion Module Specifications Order Number CTSI-DQP16-S1 CTSI-DQN16-S1 CTSI-DPN16-S1 CTSI-DMN16-S1 CTSI-DQR08-S1 Number of Output Points 16 16 8 8 8 Output Type Transistor, Sourcing Solid-state MOSFET, Sinking Relay - Dry contact Rated Output Voltage 24V DC(20.4~28.8V DC) 24V DC，110V/220V AC（5～30V DC，5～250V AC） Rated Output Current 0.5A 2A Maximum Current per Common Terminal Max. 4A Max. 4A Maximum Output Leakage Current 15uA - Surge current 8A，100ms 5A, 4s @ 10% duty cycle Output Load Resistive Load 0.5A/point, 4A/16 points, 2A/8 points 2A/point, 8A/8 points Inductive Load 7.2W/point, 24W/16 points, 12W/8 points 1A/point, 4A/8 points Lamp Load 5W/point, 18W/16 points, 9W/8 points 30W/point, 120W/8 points Contact Resistance 0.3Ω, max. 0.6Ω New device max. 0.2Ω Disconnect to Connect (Delay) 50us - Connect to Disconnect (Delay) 200us - Maximum switching rate - 10ms Maximum Output Frequency Resistive load 1KHz 10Hz Inductive load 0.5Hz 0.5Hz Lamp load 10Hz 1Hz Mechanical life (no load) - 10,000,000 Contact life (rated load) - 100,000 Isolation Field-to-logic isolation 500V AC for 1min 500V AC for 1min Coil-to-contact isolation - 1500V AC for 1min Two-output parallel operation Supports parallel connection of two outputs within the same group - Protection functions Short-circuit protection, overcurrent protection - Maximum cable length per load Shielded: 500 m
Unshielded: 150 m
- Installation
