- Product Description
-
Simple series EtherCAT module
ECT disable
Hardware dip code addressing
Type-c port update firmware
Slave module ID identification
Expanded up to 16 modules.
- Technical Spec
-
Model CTSI-ECT-00C1 Function Overview Function Category Function Item Description External Interface Function Expansion module interface Provides 1*expansion module interface, which can connect up to 16 Simple series I/O modules TYPE-C interface Provides 1*TYPE-C slave interface, supports power supply EtherCAT interface Provides 2*EtherCAT communication interfaces Isolation Function Interface isolation EtherCAT communication interface isolation Protection Function Power protection Reverse connection protection and surge absorption function provided at the power supply end Physical Characteristics Dimensions（W×H×D） 24 x 104 x 80 mm IP rating IP20 Power Supply Specifications Rated input voltage 24V DC Input voltage range 20.4V~28.8V DC Input current 1A Input power protection Supports reverse polarity protection LED Indicator Characteristics Note 1: When a module without output type is connected to the slave expansion bus, the communication between the slave and master is disconnected, and the slave will not switch to safe operation.
Note 2: Blinking: Flashes once every 200 milliseconds.PWR indicator Green ON = 24VDC power supply is normal OFF = No 24VDC power supply SF indicator Red ON = Expansion I/O bus fault or EtherCAT module fault, hardware configuration mismatch Blinking = Module error information OFF = No fault BF indicator Red ON = EtherCAT bus communication fault OFF = No fault LINK indicator(Slave status indicator) Green OFF = Not connected (0), Initializing (1) Blinking = Pre-operation (2), Safe operation (4) (Note 1) ON = Operation (8) RJ45 port indicator Green ON = Connected to other EtherCAT interfaces Blinking = Communicating with other EtherCAT interfaces OFF = Not connected to other EtherCAT interfaces Expansion I/O Capability Maximum number of modules per slave station 16 Protocol type Simple series PLC custom 100MHz bus protocol Module hot-swappable function Not supported Input PDO quantity Max 1024 bytes Output PDO quantity Max 1024 bytes Input mailbox size Max 256 bytes Output mailbox size Max 256 bytes EtherCAT Communication Port Communication interface 2*single RJ45 ports Baud rate 100Mbps Protocol type CANopen over EtherCAT (CoE) Supports PDO services Supports SDO services Supports EtherCAT state machine commands Maximum communication distance between slave stations 100m （100BASE-TX） Isolation Communication port isolation Main unit firmware upgrade Supported (via TYPE-C upgrade) Expansion module disable function Supported Alarm Slave address is uniquely corresponding to hardware;
the master will alarm when the slave address does not match the hardwareHardware Configuration Function Imported file type EtherCAT XML format file Third-party ECT master Added Simple series ECT modules support 16-slot expansion Expansion modules can add Simple series I/O modules
- Installation
