CTH300 Digital Output Modules(DQT-08,DQT-16,DQT-32)-Industrial 4.0 control and networking solutions provider ——Shenzhen COTRUST-COTRUST Technologies Co., Ltd.

Digital module

Description CPU Digital module Analog module Temperature module Communication module Power module Relay module High-speed counter Pulse output

Home > Products Center > PLC > CTH300 PLC

Digital module

CTH300 Digital Output Modules(DQT-08、DQT-16、DQT-32、DQR-08、DQR-16、DQN-16)

Contains 6 products, transistor output can be selected at 8 o'clock, 16 o'clock and 32 o'clock, and relay output can be selected at 8 o'clock and 16 o'clock. Please refer to the detailed list for detailed parameters. Features: strong anti-interference ability, photoelectric isolation, reverse connection protection of power supply, surge absorption function, overvoltage and overcurrent protection function.

Order No.：CTH3 DQT-080S1/CTH3 DQT-160S1/CTH3 DQT-320S1/CTH3 DQR-080S1/CTH3 DQR-160S1/CTH3 DQN-160S1

Specification：Transistor output,8*24VDC,16*24VDC,32*24VDC,8*2A/16*2A

Product Description

Order Data

Product Name	Specification	Order No.
DQT-080S1 digital Modules	Transistor output, 8 x 24VDC	CTH3 DQT-080S1
DQT-160S1 digital Modules	Transistor output,16 x 24VDC	CTH3 DQT-160S1
DQT-160S1 digital Modules	Transistor output,32 x 24VDC	CTH3 DQT-320S1
DQT-160S1 digital Modules	Relay output,8*2A	CTH3 DQR-080S1
DQT-160S1 digital Modules	Relay output,16*2A	CTH3 DQR-160S1
DQN-160S1 digital Modules	Relay output,16*0.5A	CTH3 DQN-160S1

Features

Modules with strong anti-jamming capacity, signal modules are used in optical isolation technology, signal acquisition accurate and stable;

Power supply has reverse polarity protection, surge absorption function, can adapt to inclement industrial conditions;

With overvoltage, overcurrent protection function.

Technical Spec

Digital output module technical specifications
Product model			DQT-08	DQT-16	DQT-32-S2	DQR-08	DQR-16	DQN-16
Order number			CTH3 DQT-080S1	CTH3 DQT-160S1	CTH3 DQT-320S2	CTH3 DQR-080S1	CTH3 DQR-160S1	CTH3 DQN-160S1
Dimension(W×H×D)			34×115×100mm 34×115×100 mm
Output points			8	16	32	8	16	16
Current consumption		24VDC	50mA	95mA	180mA	64mA	130mA	-
		+5V bus	70mA	120mA	210mA	45mA	60mA	130mA
Output type			Solid state -MOSFET, source type			Relay - Dry contact		Solid state -MOSFET, NPN drain type
Output rated voltage			24VDC			DC:24V,AC:110V/220V		24V DC
Output voltage range			20.4~28.8VDC			DC:5～30V,AC:5～250V		20.4V~28.8V DC
Logic 1(Min.)			20VDC			—
Logical 0(Max.)			0.1VDC,10KΩload			—
Output current (Max.)			0.5A			2A		0.5A
Each common end current			Max. 4A			Max. 16A		Max. 4A
Output leakage current (Max.)			15uA			—		10uA
Inrush current			8A，100ms			5A,4s@10% duty cycle		8A，100ms
Modulation load			5W			DC:30W/AC:200W		5W
Contact resistance			0.3Ω，Max.0.6Ω			Max.0.2Ω		Typical 0.15Ω, max. 0.3Ω
Output delay			Disconnect to connected (Max.):50us, connected to disconnected (Max.):200us			Max. 10ms		Disconnect to connected: 50us, connected to disconnected: 200us
Output frequency (Max.)			1kHz			Resistive load: 10Hz, lamp load: 1Hz, inductive load: 0.5Hz		1kHz
Mechanical life (no load)			—			10,000,000		-
Contact endurance(rated load)			—			100,000		-
Isolate	site-to-logic		500VAC,Last 1min			500VAC,Last 1min		500V AC，Last 1min
	Coil to contact		—			1500VAC,Last 1min		-
Separate points for each group			8	8	8	8	8	8
The number of output points connected simultaneously			8	16	32	8	16	16
Two outputs in parallel			Supports parallel connection of 2 outputs in the same group
Cable length	shield		500m
	unshielded		150m
Note: CTH3 DQT-320S2 adopts plug and pull type crimping terminal