- Product Description
-
Order Date
Products data
Order No. CTH200 series CPU
CPU
H212
32KB program space/8KB data space
1×Ethernet port (100M，support MICO remote)
1×RS485 port ( PPI, MODBUS_RTU )
Supports 2×100KHz high-speed source output
Support Trace tracing
Support analog expansion board (2AI 1AO or 4AI 2AO)
(Not support RS485/CAN expansion board and module expansion)
220VAC, 8DI/8DO (relay output, 2A),
Support 4×50k single-phase/1×30k dual-phase HSC.
CTH2 212-1BD20-0X16
- Technical Spec
-
CPU H212 Specification CTH2 212-1AD20-0X16 CTH2 212-1BD20-0X16 8DI/8DO Transistor 8DI/8DO Relay Overall Characteristic Dimensions (W × H× D) 96×72×80mm Power Dissipation 5W 7W Program memory 24KB+8KB(Confidential Database） Data memory 8KB Power-off memory 8KB Data Preservation FlashROM（Permanent Preservation） The maximum number of expansion modules Do not support Maximum digital quantity 12DI/12DO（Adapt through the new expansion board） Maximum analog quantity 4AI/2AQ（Adapt through the expansion board） Power Characteristics Rated input voltage DC24V AC220V Input voltage range 20.4V~28.8V DC 85 V~265V AC Impact current 6A @ 28.8VDC 8A @ 264VAC Isolation (field and logic) No AC power supply：1500V AC Hold time (power off) More than 10ms 10ms/20ms以上，120/240V AC +5V Power output Expansion bus Do not support BD expansion board bus 200mA（With switch control） Communication 10mA 100R resistance Sensor +24V power output No Voltage Range：20.4~28.8V DC Rated Current：300mA Ripple noise: peak-to-peak less than1V (<10MHz) Isolation (sensor and logic) : Not isolated Power Alarm Alarm for insufficient power supply of 15V, alarm bit SM195.1 Conventional Features Total number of timers 1ms 4 10ms 16 100ms 236 Counter 256 Accumulator 4 Memory storage bit 256 Bit The retention time of memory storage bits after power failure Permanent Preservation Local storage area（L） 64 bytes independent Sequential control relay（S) 256 Bit Time interruption 2*1ms resolutions Edge interruption 4 rising edges and/or 4 falling edges（I0.0，I0.1，I0.2，I0.3） Execution time of Boolean operations ≤0.15µs Floating-point operation execution time ≤6.2µs Real-time clock Built-in, the clock does not support power-off retention at the factory, but a button battery can be configured The number of BD expansion board interfaces 1，supporting analog quantity expansion board System indicator light LINK/ACT Indicator light (green） ON：Connect
Blinking：Transmit
OFF：Disconnect
Remarks：Blinking：Flash once every 200 milliseconds.RMC Indicator light (green） ON：The CPU has successfully communicated with the remote server (the parameters of the Ethernet communication port have been correctly configured)
OFF：Communication with the remote server failed or communication with the remote server is prohibitedSF/DIAG Indicator light (red） ON：System failure.
OFF：No system failure.RUN Indicator light (green） ON：Run
OFF：StopSTOP Indicator light (yellow） ON：Run
OFF：StopDigital input indicator light (green) ON：Signal input
OFF：No signal inputDigital output indicator light (green) ON：Signal input
OFF：No signal inputRun switch RUN/STOP External battery interface Do not support，Configurable button battery, alarm position SM195.0 Programming card Support Memory card Do not support Motion control function Supports single-axis motion control
Functions such as positioning, speed and homingNo Integrated communication function (PPI/ free port) Communication interface 1*communication port (PPI slave station and free port mode can be switched) PORT0：PPI/ Free Port, standard RS485 level PPI baud Rate(baud) 9.6k、19.2k and187.5k Free port baud rate(baud) 1.2k ~ 115.2k，with built-in Modbus RTU master/slave station functions Maximum number of sites Each section has 32 stations, and each network has 126 stations The maximum number of master stations 32 Point-to-point (PPI master Station mode) Yes (NETR/NETW), each instruction can read/write up to 200 bytes at most, and up to 8 read/write instructions are allowed at the same time MPI connection 1*MPI slave station can connect to a maximum of 8*MPI master stations Protocol type Connect to the PC to download/upload/monitor
Connect to the host computer and program or debug through the human-machine interface
Standard MODBUSASCI/RTU communication, free format communicationThe number of protocol connections and the number of transmissions Modbus_RTU master/slave: Data transmission can only be performed once at a time, with a total of 240 bytes Each paragraph
Maximum cable lengthUse an isolation repeater At a baud rate of 187.5k, it is 1000 meters; at 38.4k, it is 1200 meters Do not use an isolation repeater 50 m Ethernet communication function Communication interface 1*Standard Ethernet port Communication standard Compliant with IEEE802.3 Transmission speed 10Mbps/100Mbps adaptive Adaptive cross-connection Support Hardware interface RJ45 Protocol type UDP，TCP/IP Configuration method Download the network block through the programming software MagicWorks PLC for configuration Protocol type UDP_PPI protocol
Modbus TCP/IP master-slave protocol
S7 master-Slave protocol
Socket
Support Ethernet communication between PLCS
Support MiCo Ethernet programmingMaximum number of connections 8*UDP/PPI without master-slave distinction 8*TCP/Modbus without master-slave distinction 16*Socket connections, 8 for UDP and 8 for TCP 8 for S7 protocol Regardless of master-slave station Maximum single data transmission UDP/PPI each operation up to 200 bytes Each operation of TCP/Modbus is up to 240 bytes at most A Socket can operate at most 512 bytes each time The S7 protocol can operate at a maximum of 200 bytes per operation Length of communication cable 100M, cable type: CAT5e standard or above Isolation Communication port isolation IP address reset function Switch the operation switch 5 times in a row within 2 seconds Upgrade the firmware function Only serial port upgrade is supported I/O Characteristic The number of digital input points of this machine 8 Input type Leak type/source type The digital output points of this machine 8 Output type Solid- MOSFET, source type Relay - dry contact Digital input characteristics Rated voltage 24 VDC Input voltage range 20.4~28.8 VDC Surge voltage 35 VDC，Last for 0.5s Logic 1 Signal (Minimum) 15V DC，>2.5mA Logic 0 signal (maximum) 5V DC，<1mA Connect the 2-wire proximity switch sensor (BERO)
Allowable leakage current (Maximum)1mA Input filtering Configurable, supporting 3.2ms and 6.4ms, with a default of 6.4ms Isolation (on-site and logical) isolation group 500 VAC，1 minute Simultaneously connected input 8 Maximum cable length Shielded: 500 meters (standard input), 50 meters (high-speed counter input) Unshielded: 300 meters (standard input) High-speed counting characteristic Pulse capture input 8 High-speed Counter High-speed Counter Totality 4 Single-phase Counter 4×50KHz，Support HSC0、HSC1、HSC4 and HSC5，Do not support HSC2 and HSC3 AB phase Counter 1×30KHz，Support Mode 9，HSC0 Input point configuration of the high-speed counter HSC input signal Mode Interrupt description input point HSC0 I0.0 I0.1 HSC1 I0.6 I0.7 HSC4 I0.3 HSC5 I0.4 0 A single-phase counter with internal direction control Clock -- 9 A/B phase orthogonal counter Clock A Clock B Digital output characteristics Output rated voltage DC：24V DC：24V，AC：110V/220V Output voltage range DC：5～30V DC：5～30V，AC：5～250V Output current (maximum) 0.5A 2A Surge current 8A，100ms 5A，4s@10% Duty Cycle Lamp load 5W DC：30W /AC：200W Conduction resistance Typical value 0.3Ω，Maximum 0.6Ω Maximum 0.2Ω Output delay (maximum）
Disconnect to connect/Connect to disconnectDisconnect to connect：
2us（Q0.0，Q0.1），---15us（Other）Disconnect to connect：Maximum10ms Connect to disconnect：
10us（Q0.0，Q0.1），---130us（Other）Connect to disconnect：Maximum10ms Mechanical life (no-load) No 10,000,000 Contact life (rated load) No 100,000 Simultaneously connected output 8 Two outputs in parallel Do not support Yes, only when the same group is output Maximum cable length Shielded 500 m Unshielded 150 m High-speed counting characteristic Pulse output 2*50KHZ motion control output (Note: Modes cannot be used simultaneously) Do not support Support pulse library Support the motion control library motion_ctrl_lib Do not support Corresponding application points Pulse point：Q0.0/Q0.1
Direction point：Q0.2/Q0.3Do not support Special function The direction point can be chosen not to be used Do not support
- Installation
-
Size:
Wiring diagram
